Premium Permanent Magnetic Drum Separator
Permanent Drum Type Magnetic Separator is most useful non electric separator for separating tramp iron from non magnetic material processed in bulk quantity for the purity of end products , recovery of metal having commercial value and protection of processing plant and machinery. These are widely used in all the processing industry for separation of iron contamination from minerals , chemicals , food flour, plastics, grains, sand, cement, fertilizers, abrassives, glass , slag , ores , rock , refractories and many other products.
Working Principle & Magnetic System
The Permanent Magnetic Drum consist of stationary Permanent Magnetic assembly having uniform and everlasting Magnetic field across the entire width of the drum, which is effective over approximately half the drum circumference as shown in fig.
Drum shell made of non magnetic stainless steel revolves around the magnetic field. As the material fed evenly from the chute falls over the drum, powerful magnetic field attracts and holds ferrous particles through the revolving shell. As the revolving shell carries the iron particles through the stationery magnetic field the non magnetic material falls freely from the shell while ferrous particles are firmly held until carried beyond divider and out of magnetic field.
The strength of the permanent magnetic drum is guaranteed to be greater than corresponding electromagnetic Drum. The Permanent magnets used are everlasting magnets and its strength does not diminish during normal use and can be used through out the life of the installation.
Technical Specifications
| MODEL | CAPACITY FOR GRAIN | DIA OF DRUM | LENGTH OF DRUM | MOTOR H.P. | |
|---|---|---|---|---|---|
| PPMDS 2 | 2 MT/HR. | 400 MM | 600 MM | 1 HP+ 0.5 HP | |
| PPMDS 4 | 4 MT/HR. | 400 MM | 750 MM | 2 HP + 0.5 HP | |
| PPMDS 8 | 8 MT/HR. | 500 MM | 1000 MM | 3 HP + 0.5 HP | |
| PPMDS 12 | 12 MT/HR. | 600 MM | 1250 MM | 5 HP + 0.5 HP | |
| PPMDS 16 | 16 MT/HR. | 600 MM | 1500 MM | 5 HP + 0.5 HP | |
| PPMDS 25 | 25 MT / HR. | 600 MM | 2500 MM | 5 HP + 0.5 HP | |